Sirius Satellite Radio SDSV6V1 User Manual

19
3 Attach the Vent Mount to the
PowerConnect Vehicle Dock using
the provided screws.
4 Push the Vent Mount onto the
vehicle vent as shown (1) until
it hooks on the rear of the vent
louver (2).
5 Rest the foot against the
bottom of the vent (2), and adjust the tilt of the Vent Mount by
repositioning the foot to a different adjustment hole (3).
To remove the Vent Mount, push the mount into the vent. Then lift up until
disengaged from the rear of the vent louver, and remove the Vent Mount.
PUSH
Dash
Vent
Louver
Vent
Vent
Dash
Dash
HOOKED
TILT
ADJUSTMENT
HOLES
FOOT
1 2 3

Sirius Satellite Radio SDSV6V1 Specifications

General

Brand	Sirius Satellite Radio
Model	SDSV6V1
Category	Car Receiver
Language	English