23
When the test has been completed satisfactorily, repeat with any extractor fans in the premises running on
the highest setting, and any communicating doors open.
Finally, repeat with all doors open.
DO NOT allows the fire to be used until the test is satisfactorily passed.
SECTION 14: BRIEFING THE CUSTOMER
All instructions must be handed to the user for safekeeping.
Show the customer how to light and operate the fire.
After commissioning the appliance, the customer should be instructed on the safe use of the appliance and
the informed for the need of regular servicing.
Frequency of service depends on usage, but MUST be carried out at least once annually.
Cleaning of the fire may be achieved when the fire is cold using a damp cloth and mild detergent on most
surfaces, with the exception of the ceramic fuel bed.
A soft brush i.e. paint brush may be used to clean the ceramic fuel bed taken care not to use excessive
pressure.
Scratched and other superficial damage to the matt black paintwork of the appliance can be covered with
matching heatproof spray.
Use only the manufacturers’ recommended spray paint.
To Next Page
Loading...
