EasyManua.ls Logo

Sirocco Eco4 E4 HE Plus - Installation Requirements and Site Preparation; Section 1 & 2: Key Requirements

Sirocco Eco4 E4 HE Plus
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
Section 1: IMPORTANT NOTES
This fire is an Inset Live Fuel Effect Gas Fire providing radiant warmth. It is designed to operate
on Natural Gas or LPG.
It is the LAW that all gas appliances and fittings are installed by a competent person such as a
Gas Safe Registered fitter and in accordance with the Gas Safety (Installation and Use)
Regulations 1998, the relevant British Standards for Installation, Codes of Practice and in
accordance with the manufacturers’ Instructions.
The installation shall also be carried out in accordance with the following regulations:
The Building Regulations issued by the Department of the Environment, the Building Standards
(Scotland)
(Consolidation) Regulations issued by the Scottish Development Department.
BS 1251
BS 4543 part2
BS 5440 parts 1&2
BS 5871 part 3
BS 6461 parts 1&2
BS 6891
BS 8303
Failure to comply with these regulations could lead to prosecution and deem the warranty Invalid.
This appliance must be installed in accordance with the rules in force and used only in a
sufficiently ventilated space.
Consult all instructions before installation and use of this appliance.
The appliance must be registered once commissioned with the regulatory governing body.
This appliance is free from any asbestos material. The Refractories and coal bed are constructed
from ceramic fibre.
Note - For Republic of Ireland, reference should be made to the relevant standards
governing installation, particularly in regard to flue sizing and ventilation. See IS813,
ICP3, IS327 and any other rules in force.

Related product manuals