Sirona Dental Systems GmbH 3 Electromagnetic compatibility
Installation Requirements C8
+
/C8
+
Tu r n
60 28 000 D3417
D3417.021.04.11.02 37
English
The UNIT is intended for operation in the electromagnetic
environment specified below.
The customer or user of the UNIT should make sure that it
is used in such an environment.
3.2 Electromagnetic emission
Emission measurement Conformity Electromagnetic environment guidelines
RF emissions according to CISPR
11
Group 1 The UNIT uses RF energy only for its internal function. There-
fore, its RF emissions are very low and are not likely to cause
any interference in nearby electronic equipment.
RF emissions according to CISPR
11
Class B The UNIT is intended for use in all facilities, including residen-
tial areas and in any facilities connected directly to a public
power supply providing electricity to buildings used for resi-
dential purposes.Harmonics
according to IEC 61000-3-2
Class A
Voltage fluctuations/Flicker accord-
ing to IEC 61000-3-3
Complies
To Next Page
Loading...
