What to do if Sirona Dental equipment shows a Command error?
If you encounter a 'Command' error with your Sirona Dental equipment, first restart the unit and perform the self-test again. If the problem persists, check the connecting cable L83 between board DX1 and the sensor unit. If necessary, replace board DX11 or the sensor unit.
Why does Sirona Dental equipment show a timeout error?
If the Sirona Dental equipment self-test could not be completed within 20 seconds, it indicates a timeout issue.
What to do if Sirona Dental equipment shows a Prep error?
If you encounter a 'Prep' error with your Sirona Dental equipment, check the connecting cable L83 between board DX1 and the sensor unit. If the problem persists, replace board DX11 or the sensor unit.
What to do if Sirona Dental equipment shows a Transfer error?
If you encounter a 'Transfer' error with your Sirona Dental equipment, check the connecting cable L83 between board DX1 and the sensor unit. If the problem persists, replace board DX11 or the sensor unit.
General| X-Ray Tube Voltage | 60-90 kV |
|---|---|
| Focal Spot | 0.5 mm |
| Type | Panoramic X-ray |
| Technology | 2D imaging |
| Image Resolution | High Resolution |
| Field of View | Panoramic, TMJ, Sinus |
| Power Supply | 220-240 V, 50/60 Hz |
| Imaging Programs | Standard panoramic, pediatric panoramic, sinus, TMJ |
To Next Page
