Siser Romeo - Cutter Settings and Features; General Settings; WiFi Connectivity

WIFI
NETWORK NAME SCAN
PASSWORD
NETWORK NAME
PASSWORD123
IP ADDRESS
xxx.xxx.xxx.200
APPLY
DEFAULT
CONNECTED:
SISER 111.222.3.444
GENERAL SETTINGS
LED ALERT SLEEP UNIT LANGUAGE
GENERAL SETTINGS
1. 2. 3. 4. 5.
Make general adjustments to your cutter
1. LED - Turn the LED ON/OFF and adjust the brightness
2. Alert - Turn the chime and/or LED ON/OFF that indicates a
completed job
3. Sleep - Set how much time of inactivity will put the cutter to sleep
4. Unit - Choose between metric and imperial measurements
5. Language - Select desired language
WIFI
Set up the cutter’s wireless connection
1. Scan - Searches for available WiFi networks that the cutter can
connect to
2. Eye Button - Shows or hides the password entered
3. IP Address - Manually enter an IP Address
4. Apply - Uses the manually entered IP Address to connect
5. Default - Switch WiFi to Hotspot mode
1.
2.
3.
4.
5.
11