Siser TS-ONE - Machine Description; Machine Operation; Mechanical and Operating Information

This manual is the property of SISER S.r.l., any even partial reproduction is forbidden
Mod. PRD 20/3 - Last updating 10/2019
TS-One Manual for use and maintenance
31
2 DESCRIPTION OF THE MACHINE
2.1 Operation of Machine
The TS-ONE machine is designed and manufactured intended solely for the transfer of

temperatures. The machine is intended for professional use.
The manual machine is designed to be used by a single operator; the maximum
temperature of 220°C may never be exceeded.
Do not operate the machine under any conditions or for any other


2.2 Mechanical and Operating Information
• 
• 
the other side
• the mobile arm supporting the heated platen at its free end
• the handle
• the control panel
Handle
Upper Heating Plate
Lower Plate
Adjusting Pressure
Control panel
Upper Rotating Arm
Stand
Fixed arm
TS
ONE
2
EN