This manual is the property of SISER S.r.l., any even partial reproduction is forbidden
Mod. PRD 20/3 - Last updating 10/2019
TS-One Manual for use and maintenance
32
in contact with the metal elements. The heat transfer material is applied to the fabric by
positioning them between the base platen and the heated platen by effect of the temperature
and closure pressure exerted using the handle.
2.3 Interchangeable Platens
The TS-One heat press can be equipped with different platens and accessories:
2.4 Technical data
Voltage
Rated power at full load
Weight
Platen dimensions
Maximum temperature
Cooling time
Height
2.5 Use Conditions
Temperature: +5°C/+40°C
Humidity:
Atmospheric pressure: operation of the press is guaranteed up to 1000 m asl
at platen 38x50 curved platen for capsat platen 15x15
“Achille” curved platen
for heels of shoes
“H” lower at
platen
lower at platen
15x30 – 10x38
TS
ONE
2
230 Volt 50Hz
2 kW
45 Kg
38 x 50 cm
230°C
120 minutes
66cm
55cm
65cm
230 Volt 50Hz
2 kW
57 Kg
38 x 50 cm
230°C
120 minutes
63cm
121/125cm
64cm
230 Volt 50Hz
2 kW
58 Kg
38 x 50 cm
230°C
120 minutes
70cm
56cm
88/142cm
EN
TS-ONE TS-Double Swing and Pull
To Next Page
Loading...
