This manual is the property of SISER S.r.l., any even partial reproduction is forbidden
Mod. PRD 20/3 - Last updating 10/2019
TS-One Manual for use and maintenance
36
4 INSTALLATION
adequate technical training and experience to be able to perform the different operations with
4.1 Transportation and Set-Up
Pay utmost attention in all stages of hoisting, moving and positioning the machine.
Transport and storage conditions:
Temperature: +5°C/+40°C
Humidity:
Atmospheric pressure: operation of the press is guaranteed up to 1000 m asl
The press is shipped in cardboard containers with the base platen and the pressing plate
disassembled from the central upright arms.
people; lifting by the stand or the arm. Do not lift the press using the plates for leverage.
For the most ergonomic use, place the press on a surface at a height of
approximately 80 cm, with an adequate space for complete opening of the
press).
The machine comes equipped with a solid stand and will not vibrate or move in any way that
could endanger its stability.
The operator may assess whether to fasten the base using the holes present.
Select a stable and sturdy surface on which to place the machine.
Re-assemble the detached platens by referring to the drawings of the parts of the press in
chapter 9.
TS
ONE
4
EN
To Next Page
Loading...
