Need help?Do you have a question about the Sit 610 AC3 and is the answer not in the manual?
Key features including thermoelectric flame failure device, pressure adjuster, and on-off thermostat.
Detailed listing and identification of all components of the gas control unit.
Information on gas connections, water connections, thermostat ranges, and pressure data.
Detailed diagrams and measurements of the gas control unit's physical size.
Graphical and tabular data on flow rate as a function of pressure drop for different gas families.
Step-by-step instructions for initiating pilot and main burner ignition.
Guidance on safely shutting down the gas control unit.
Procedures for connecting gas pipes and water flanges to the unit.
Instructions for connecting the thermocouple and pilot burner.
Steps to adjust outlet pressure and override the pressure regulator.
Procedure for adjusting the gas flow rate to the pilot.
Key features including thermoelectric flame failure device, pressure adjuster, and on-off thermostat.
Detailed listing and identification of all components of the gas control unit.
Information on gas connections, water connections, thermostat ranges, and pressure data.
Detailed diagrams and measurements of the gas control unit's physical size.
Graphical and tabular data on flow rate as a function of pressure drop for different gas families.
Step-by-step instructions for initiating pilot and main burner ignition.
Guidance on safely shutting down the gas control unit.
Procedures for connecting gas pipes and water flanges to the unit.
Instructions for connecting the thermocouple and pilot burner.
Steps to adjust outlet pressure and override the pressure regulator.
Procedure for adjusting the gas flow rate to the pilot.
General| Frequency | 50/60 Hz |
|---|---|
| Output Voltage | 24VDC |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20°C to +70°C |
| Protection | Overload, Overvoltage, Short Circuit |
| Efficiency | 85% |
| Humidity | 5% to 95% non-condensing |
To Next Page
