Need help?Do you have a question about the Sit 710 MINISIT and is the answer not in the manual?
Details on connecting gas pipes, torque specifications, and alternative nut/olive connections for the main gas line.
Guidelines for connecting pipes to the pilot burner, including size options and tightening torque.
Information on thermostat calibration, noting that re-calibration is not authorized and may void warranty.
Instructions on adjusting the minimum flow rate using the MIN screw for optimal low fire settings.
Guidance on adjusting the pilot gas flow rate by turning the relevant screw.
Procedure for adjusting outlet pressure using the setting screw (A) on versions with a pressure regulator.
Steps to adjust the outlet flow using screw (B), particularly for versions with a pressure regulator.
Details on connecting gas pipes, torque specifications, and alternative nut/olive connections for the main gas line.
Guidelines for connecting pipes to the pilot burner, including size options and tightening torque.
Information on thermostat calibration, noting that re-calibration is not authorized and may void warranty.
Instructions on adjusting the minimum flow rate using the MIN screw for optimal low fire settings.
Guidance on adjusting the pilot gas flow rate by turning the relevant screw.
Procedure for adjusting outlet pressure using the setting screw (A) on versions with a pressure regulator.
Steps to adjust the outlet flow using screw (B), particularly for versions with a pressure regulator.
General| Brand | Sit |
|---|---|
| Model | 710 MINISIT |
| Category | Controller |
| Language | English |
To Next Page
