EasyManua.ls Logo

Sit 840 SIGMA - TECHNICAL DATA; General Specifications; ELECTRICAL DATA

Sit 840 SIGMA
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
ELECTRICAL DATA
TECHNICAL DATA
The technical data specified below refers to the European standard, EN 126 “Multifunctional controls for gas-burning appliances”
Group 2
Automatic valves (EV) EV1 class A or B / EV2 class C or J
Pressure regulator (PR) Class B
Outlet pressure setting range 2-50 mbar
Gas families 1st, 2nd, 3rd
Ambient temperature 0°C...60°C (-20°C...60°C on request)
Maximum inlet pressure 60 mbar
Opening time of automatic valves <2 s
Closing time of automatic valves <1 s
Assembly position any position
Inlet/outlet gas connection Male G3/4 B ISO 228
Connections with flanges M4 (4) flanges minimum full
thread 6 mm
Union joint (accessory 0.982.001)
Female connection Rp 1/2 ISO 7 (105 mm version)
Side oultet M5 (3) flanges minimum full thread 7 mm
Pilot M10 X1 for 4 mm, 6 mm or 1/4” tubing
Pressure test point 9 mm
Pressure compensation
7 mm
AUTOMATIC SHUT-OFF VALVES EV1 EV2 EV1 EV2
Nominal Supply Voltage
(AC)
Current nominal voltage
(mA)
Power at nominal voltage
(
W
)
230 V 50 Hz 40 12 4.3 2.0
24 V 50 Hz 390 100 4.6 2.0
Protection degree:
IP 40 with SIT NAC 504 connector. IP 44 with SIT NAC 504 connector and gasket
IP 40 or IP 44 with connectors 960.4 serie
ENGLISH

Related product manuals