Wireless Settings
You can set parameters that are used for the wireless stations to connect to this router.
The parameters include Mode, ESSID, Channel Number and Associated Client.
Wireless Function
Enable or Disable Wireless function here. Click Apply and wait for module to be ready &
loaded.
Basic Settings
• Band: Allows you to set the AP fixed at 802.11b or 802.11g mode. You can
also select B+G mode to allow 802.11b and 802.11g clients at the same time.
• ESSID: This is the name of the wireless signal which is broadcasted. All the
devices in the same wireless LAN should have the same ESSID.
To Next Page
Loading...
