Authentication Mode It shows the active authentication mode for the wireless
connection.
Passphrase Key It shows the passphrase key that is randomly generated by
the wireless router during the WPS process. You may need
this information when using a device which doesn’t support
WPS.
Mode In Client mode the device is set to connect to your existing
network. In Registrar mode the device is set to connect to
your clients.
WPS via Push Button Press the button to start the WPS process. The device will
wait for the WPS request from the wireless devices within 2
minutes.
WPS via PIN You can fill-in the PIN code of the wireless device and press
the button to start the WPS process. The router will wait for
the WPS request from the wireless device within 2 minutes.
To Next Page
Loading...
