EasyManua.ls Logo

Sitecom WL-130 - User Manual

Sitecom WL-130
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Wireless Range Extender
WL-130
Full Manual

Other manuals for Sitecom WL-130

Question and Answer IconNeed help?

Do you have a question about the Sitecom WL-130 and is the answer not in the manual?

Summary

Hardware Installation Guide

Install WL-130 as Access Point

Step-by-step guide to physically install the WL-130 as a wireless access point.

Install WL-130 as Universal Repeater

Instructions for installing the WL-130 to function as a universal repeater.

Wireless LAN Access Point Configuration

Configure from Wireless Station

Steps for connecting to and configuring the Access Point wirelessly.

Configuring the WL-130 Features

Wireless Network Settings

Configures wireless modes (AP, WDS, Repeater), ESSID, and Channel Number.

AP Bridge-WDS Mode Settings

Details the configuration interface for the AP Bridge-WDS mode.

Universal Repeater Mode Settings

Explains Universal Repeater mode configuration parameters like ESSID, Band, and MAC.

WDS Security Setup

Configures security for communication between bridged access points.

WEP Encryption Details

Configuring WEP keys for data encryption between access points.

Wireless Security Options

WEP Encryption Options

Setup options for WEP encryption, including key length and format.

WPA Pre-shared Key Security

Configuring WPA with pre-shared key for enhanced wireless security.

WPA RADIUS Security

Setting up WPA using a RADIUS server for authentication and encryption.

Advanced Settings Configuration

System Utility Management

Password and IP Management

Configure login password and network IP settings for the Access Point.

Backup and Restore Configurations

Firmware Upgrade Process

How to Upgrade Firmware

Steps to download and install new firmware for the Access Point.

System Reset Functionality

Summary

Hardware Installation Guide

Install WL-130 as Access Point

Step-by-step guide to physically install the WL-130 as a wireless access point.

Install WL-130 as Universal Repeater

Instructions for installing the WL-130 to function as a universal repeater.

Wireless LAN Access Point Configuration

Configure from Wireless Station

Steps for connecting to and configuring the Access Point wirelessly.

Configuring the WL-130 Features

Wireless Network Settings

Configures wireless modes (AP, WDS, Repeater), ESSID, and Channel Number.

AP Bridge-WDS Mode Settings

Details the configuration interface for the AP Bridge-WDS mode.

Universal Repeater Mode Settings

Explains Universal Repeater mode configuration parameters like ESSID, Band, and MAC.

WDS Security Setup

Configures security for communication between bridged access points.

WEP Encryption Details

Configuring WEP keys for data encryption between access points.

Wireless Security Options

WEP Encryption Options

Setup options for WEP encryption, including key length and format.

WPA Pre-shared Key Security

Configuring WPA with pre-shared key for enhanced wireless security.

WPA RADIUS Security

Setting up WPA using a RADIUS server for authentication and encryption.

Advanced Settings Configuration

System Utility Management

Password and IP Management

Configure login password and network IP settings for the Access Point.

Backup and Restore Configurations

Firmware Upgrade Process

How to Upgrade Firmware

Steps to download and install new firmware for the Access Point.

System Reset Functionality

Sitecom WL-130 Specifications

General IconGeneral
Frequency band2.4 GHz
Maximum data transfer rate54 Mbit/s
InternalNo
Compliance industry standardsIEEE 802.11b, IEEE 802.11g

Related product manuals