Sitecom WL-130 - Wireless Site Survey

Wireless Range Extender (WL-130) Configuration
16
Parameter Description
MAC Address
MAC address of this active wireless station.
Tx Packet
The number of transmitted packets that are sent out from this
active wireless station.
Rx Packet
The number of received packets that are received by this active
wireless station.
TX Rate
The transmission rate in Mbps.
Power Saving
Shows if the wireless client is in Power Saving mode.
Expired Time
The time in seconds before dissociation. If the wireless station
is idle longer than the expired time, the access point will
dissociate it. The wireless client station has to associate again
when it become active.
Refresh
Refresh the “Active Wireless Client Table”.
Close
Close the “Active Wireless Client Table”.
Wireless Site Survey
When this access point is in “Universal Repeater mode”, it should associate with an access
point or station and connect to your wireless LAN through the associated access point or
station. “Wireless Site Survey” searches for all available access points near by. You can select
one access point listed in this table.