REV. 02 6 / 30
CHAPTER 2 – PRODUCT IDENTIFICATION
The identification data of the machine are shown in the label placed on the control unit.
Use the above data both to order spare parts and when getting in touch with the
manufacturer (inquiry). The removal of this label is strictly forbidden.
Machines may be updated or slightly modified from an aesthetic point of view and, as a consequence,
they may present different features from these shown, this without prejudicing what has been
described herein.
2.1 WARRANTY CERTIFICATE
The warranty is valid for a period of 12 months starting from the date of the purchase invoice.
The warranty will come immediately to an end when unauthorized modifications to the machine or
parts of it are carried out.
The presence of defects in workmanship must be verified by the Manufacturer’s personnel in charge.
2.2 TECHNICAL SERVICING
For all servicing and maintenance operations not specified or shown in these instructions, contact
your Dealer where the machine has been bought or the Manufacturer’s Commercial Department.
Only skilled personnel who are familiar with the lift and this manual shall be allowed to carry out
packing, lifting, handling, transport and unpacking operations.
LOGO
Type: ……….
Model: ……….
Serial Number: ……….
Year of manufacturing: ……….
Capacity: ……….
Voltage: ……….
Power: ……….
To Next Page
Loading...