SIYI DK30 - Linking; Manual Linking; Linking through SIYI Tx APP

DK30 Transmitter User Manual V1.2
14
2018 SIYI Technology Copyright
3.3 Linking
3.3.1 Manual Linking
Press and hold S5, S6 buttons on the back of DK30 transmitter, then toggled down
LD and RD at the same time, DK30 will beep an urgent “DiDiDi…”; then toggle up
LD and RD, the urgent “DiDiDi…” turns to a slow and rhythmic “Di-Di-Di”, and link
indicator blinks red quickly. DK30 transmitter is ready for linking.
Press down sky station linking button and hold for more than 3 seconds, transmitter
link indicator starts to blink red quickly. When link indicator blinks green quickly,
DK30 transmitter is finished linking.
3.3.2 Linking through “SIYI TX” APP
Please refer to content “4 SIYI TX APP” in this manual.