SIYI DK30 - 5 Firmware Upgrading

DK30 Transmitter User Manual V1.2
25
2018 SIYI Technology Copyright
6 Firmware Upgrading
DK30 transmitter supports firmware upgrading.
Please download “SIYI Assistant” software and connect transmitter with computer.
Files and software can be downloaded on SIYI Technology’s official website.
Steps to Upgrade Firmware
1. Please visit SIYI Technology’s official website (http://www.siyi.biz);
2. In DK30 transmitter product description page, tap on “Downloads”;
3. Select SIYI Assistant software, driver, the latest firmware and voice broadcast
files, tap on “Download”;
4. Unzip the files, install SIYI Assistant and driver to computer;
5. When installation is finished, use an USB cable, connect its one end to the
Micro-USB port on DK30 transmitter, another end to computer;
6. Open SIYI Assistant, check transmitter’s current firmware version; if it was not
the latest version, tap on “Upgrade” to firmware upgrading menu;
7. Load the latest firmware, tap on “Upgrade” to upgrade firmware;
8. If you need to upgrade voice broadcast files, please repeat steps 6-7.