FM30 User Manual V1.1
19
2020 SIYI Tech All Rights Reserved
4. Go to the page for signal output settings in your radio transmitter and set it as
S.Bus / PPM output.
5. If the STA Indicator turns to Solid Green, it means that your radio transmitter
signal output is recognized and received.
6. Bind FM30 transmitter with FR / FR Mini receiver and test if it works normally.
Mark: Setting steps may be different for different OPENTX version or different radio
transmitters. Products are designed for OpenTX 2.3. Please refer to their manuals for detail.
To Next Page
Loading...
