FM30 User Manual V1.1
3
2020 SIYI Tech All Rights Reserved
Always power off your aircraft/vehicle/model first, FM30 radio module the second.
Before changing any settings on the transmitter, make sure your
aircraft’s/vehicle’s/model’s engines are powered off and their motor wires are off connection,
in case of a sudden switch-on.
When you start your aircraft/vehicle for the first time, make sure that the fail-safe
settings in your transmitter is activated.
Always switch on the transmitter first and hold the throttle joystick at its bottom
position, then power on your aircraft/vehicle/model.
1.3 Storage/Carrying/Recycling
CAUTION
Always place your SIYI radio system and its parts at places where babies or kids do not
reach.
DANGER
SIYI radio system should be placed as below:
Not too hot (above 60℃) or too cold (under -20℃);
Not under direct sunshine or too dusty or too wet;
Not on an unstable holder which lacks of solid supports or may cause vibration;
Not nearby steam or other heat sources.
To Next Page
Loading...
