FM30 User Manual V1.1
21
2020 SIYI Tech All Rights Reserved
Steps of Using FM30 Radio Module with Speedy Bee
1. Wire “TX” and “RX” in your flight controller’s UART port to “RX” and “TX” in FR
Receiver’s UART port or “RX3” and “TX3” on FR Mini Receiver.
*Wiring sequence is “TX to RX” and “RX to TX”.
2. Set flight controller baud rate to “57600”.
3. Open Speedy Bee and search the 13-digit Bluetooth ID starting with
“59********BLE” and connect.
4. Finished.
To Next Page
Loading...
