FM30 User Manual V1.1
24
2020 SIYI Tech All Rights Reserved
Steps of Setting Fail-Safe
It is necessary to keep FM30 transmitter and FR / FR Mini receiver in
communication before Fail-Safe Setting.
Protocol Mode
1. Go to “External RF” page and find “Failsafe Mode”.
2. “Hold”: If transmitter lost control to receiver, the receiver will output the last
channel value before losing control.
3. “Custom”: Users can custom the “Fail-Safe” channel value. Tap on “Set” to enter
channel settings and set your required channel value.
S.Bus / PPM Mode
Under S.Bus / PPM mode, it is impossible to do Fail-Safe settings on radio
transmitter. So, we should set FM30 Fail-Safe by reading current channel output
value.
1. Let the throttle channel outputs your required channel value for Fail-Safe.
2. Press binding button once, then press again quickly and hold it till STA Indicator
and RF Indicator are OFF.
3. Fail-Safe setting is finished when STA Indicator blinks green twice.
To Next Page
