Need help?Do you have a question about the Sizewise Bari Rehab Platform 2 and is the answer not in the manual?
Describes text types used for readability and understanding of content.
General and specific hazard warnings including electrical and pinch point risks.
Bed use must follow facility policies and procedures for safety.
Warnings related to specifications, unpacking, and setup procedures.
Guidelines for positioning, caster locking, and hand control cord safety.
Follow EMC guidelines when connecting to a powered source.
Steps to assist patients in and out of the bed to prevent falls.
Avoiding falls by maintaining patient balance when reaching.
Serious health risks associated with bed rail entrapment.
Avoiding sources that may cause electromagnetic interference.
Fire hazard and safety when using oxygen administering equipment.
Disconnecting power before cleaning the bed.
Proper dilution and contact time for cleaning agents.
Regular maintenance upholds performance and prevents wear.
Items to check at 3 and 6-month intervals.
Daily safety checks to perform before using the equipment.
Description of the electric bed and its features.
Description of the patient monitoring and weighing system.
Dimensions, weight, electrical ratings, and angles.
Max loads for bed, IV pole, and trapeze.
Details on housing, power, connectors, and weighing functions.
Details on housing, connectors, operating current, and display.
Inspect for damage and verify all components are received.
Steps for connecting mainframe sections using bolts.
Connecting ECM, routing hand control, and installing mattress.
Mounting and securing the side rails to the bed.
Steps for detaching side rails from the bed.
Connecting power, hand control, and nurse call interface.
Setting sensitivity levels for bed exit alarms.
Setting the tare weight before patient use.
Adjusting weight without affecting current reading.
Setting the time for automatic weight recording.
Configuring timed alerts for patient attention.
Adjusting volume levels for audible alerts.
Setting the device's internal clock.
Key warnings and precautions during bed usage.
Explanation of the hand control display and buttons.
Configuring detection levels for patient exit alarms.
Weighing patients and accessing weight history.
Setting and resetting timed patient alerts.
Choosing from available audible alarm tones.
Creating custom voice alerts for patients.
Adjusting scale readings for added or removed items.
Changing display units between pounds and kilograms.
Preventing accidental changes to unit measurements.
Warnings on misuse and entrapment risks.
Instructions for folding down side rails.
Procedures to prevent falls during patient transfers.
Details on head and foot section casters and their operation.
Locating key components like power, hand control, and fuses.
Mechanism for expanding or retracting the bed deck.
Placement points and weight limit for the IV pole.
Use of the manual crank during power failures.
Steps for enabling and using the power drive system.
Understanding LED status indicators for the power drive.
Securing the system when not in use.
Procedure for obtaining patient weight.
Steps to reset the scale to zero.
Recommendations for accurate weight readings.
Ensuring drive wheels are clear of the floor.
Finding manufacturer and Sizewise serial numbers.
Maximum load capacity and safety precautions.
Instructions for attaching trapeze posts, beam, and saddle.
Turning off the Trendelenburg function via ECM switch.
Health risks and relevant FDA guidelines for entrapment.
Specifications for preventing entrapment based on dimensions.
Location for performing electrical leakage tests.
Maximum allowed readings for leakage current.
Compliance with Electromagnetic Compatibility standards.
Testing against CISPR 11 standards for emissions.
Testing against IEC 61000-4-3 standards for immunity.
Effects of radio waves on bed operation and control system.
Details for hand control and power cord.
Following facility policies for proper bed use.
Fire risk identified when using oxygen administration equipment.
Using grounded outlets to prevent electrical shock.
Watch for pinch point labels indicating hazardous areas.
Specific areas where pinch points exist on the bed.
Preventing tipping and damage during bed movement.
Temperature and humidity guidelines for storage and operation.
Using steam for sanitation of the bed components.
Cleaning the scale meter and its coiled cord.
Cleaning electronic modules and hand controls.
Cleaning mattress components and covers.
Hand cleaning procedures for electronic parts.
Washing procedures for removable mattress top covers.
Cleaning internal mattress components.
Cleaning the frame of the trapeze accessory.
Procedures for removing stains from bodily fluids.
Warning regarding the use of special high-strength fasteners.
Guidelines for storage temperature, humidity, and location.
Proper disposal methods for components.
Only authorized personnel should engage in troubleshooting.
Resolving common operational issues with the bed.
Resolving system-specific issues for the Rest Secure System.
Contacting Sizewise for assistance with parts and service.
Conditions and circumstances not covered by the warranty.
Specifications and features are subject to change.
Legal notices regarding product ownership and intellectual property.
Address and phone number for product inquiries and assistance.
General| Brand | Sizewise |
|---|---|
| Model | Bari Rehab Platform 2 |
| Category | Medical Equipment |
| Language | English |
To Next Page