SJCAM SJ10PRO - POWERING ON

On the top right side of your camera
is the Power/Shuer Buon.
Press and hold it down to start your
camera.
The SJCAM splash-screen will briefly
show while the camera inializes,
and will immediately proceed to the
Main Screen.
Press and hold down the Power Buon
anyme to turn the camera off.
111
222
The LED status indicator in front fo the camera will light blue while on standby.
Blinking blue LED means it is recording.
POWERING ON
All graphics, words, and design by Troy Ferrer 2020 troy@sjcamhd.com