<
1080FHD1080FHD1080FHD
HOME
Transfer your data by plugging your
camera to a computer via USB cable.
Select Mass Storage then your
camera will show as a drive.
Or, transfer data via the app. Turn on
WiFi and pair it to your smartphone
(Android or iOS), then tap Connect
Your Camera on the app.
Press the Power/Mode button to turn
your camera on. You will hear a beep,
indicator LEDs will light up, and the
screen will display the SJCAM logo.
Default Mode is Video.
To turn o your camera, long-press
the Power/Mode button.
Powering ON/OFF your
SJ5000X
Inserting / Removing
Memory Cards
Transferring Data From Your
Camera to a Computer.
Insert a MicroSD card as shown in the
illustration above, with the label
facing the LCD screen, until it clicks
into place. To remove, just push it in
gently and the card will eject.
To make sure you do not loseNOTE:
any data, only remove or insert your
card while the camera is o.
Class 10 or higher
MicroSD card.
Via USB cable.
Via WiFi
To Next Page
