8
Installation
Wait at least
1 hour!
45°
When moving the product, do not tilt it at an angle of more
than 45 degrees.
•
Wait at least 1 hour to connect the power plug after
transporting the product.
Do not move the product while the water purifier is
running.
Make sure to connect the product to the cold water pipe.
•
If connected to the hot water pipe, the filter will be
damaged, reducing the product life.
If installing the product in a place where it could fall, install
an auxiliary leg.
•
Assemble it according to the groove as shown in the drawing.
–
Applicable to WPUA900F/WPUA800F models only.
Cold
water
Hot
water
To Next Page
Loading...