19
Cleaning
Before Cleaning
Open
Open
Lock
Lock
90°
90°
Source Water
Supply Valve
Ball Valve
1. Close the source water supply valve
connected to the water supply pipe of
the sink or the ball valve on the back of
the product.
2. Remove the power cord.
Cleaning the Water Collector
1. Remove the water collector.
– If any water is inside, the water may spill out.
2. After separating the grill from the water
collector, clean them with running water
or a soft brush.
– If the water collector is cleaned with a sharp
object, the collector may be damaged.
3. Dry the grill and the water collector in a
cool, shaded place, and assemble those
pieces to the product.
To Next Page
Loading...