SKF KFGS User Manual

EN
KFG; KFGS; KFGC (CAN bus)
for industrial use
Assembly instructions acc. to EC Dir. 2006/42/EC
for partly completed machinery with associated operating instructions
Version 02

SKF KFGS Specifications

General

Brand	SKF
Model	KFGS
Category	Water Pump
Language	English

Summary

KFG, KFGS, KFGC Pump Units

Assembly Instructions Overview

Provides instructions for assembling the KFG, KFGS, and KFGC pump units.

1. Safety Instructions

1.1 Intended Use and Authorized Personnel

Specifies intended use and defines requirements for authorized personnel.

1.3-1.6 Hazard Information

Covers hazards related to electric shock, system pressure, compressed air, and hydraulic pressure.

1.7 Explosion Protection Information

Outlines requirements for using ATEX-approved models in explosion-protected areas.

2. Lubricants

4. Assembly

4.1 General Information and 4.2 Setup/Attachment

4.3 Pump Elements and 4.4 Lubricant Filling

Describes pump elements and instructions for lubricant filling.

4.5 Electrical Connections (KFG, KFGS, and KFGC)

Details electrical connections, power supplies, monitoring, and control for all series.

4.6-4.8 System Ventilation and Fill Level Control

5. Design

5.4 KFGS Pump Units

5.5 KFGC (CAN bus) Design Features

Highlights KFGC series features, including CAN bus interface and multi-zone control capabilities.

6. Functional Description in Progressive Systems

6.1 KFG Pump Unit System Description

6.2 KFGS Pump Unit Description

Covers additional configuration, monitoring, and connectivity options for KFGS units.

6.3 KFGC (CAN bus) Unit Description

Details KFGC unit functions including lubrication process, modes of operation, and monitoring.

7. Functional Description in Single-Line Systems

7.1 KFG Pump Unit System Description

7.2 KFGS Pump Unit Description

Covers configuration, monitoring, and connectivity options for KFGS in single-line systems.

7.3 KFGC (CAN bus) Unit Description

Details KFGC unit functions including solenoid valves, multi-zone control, and control unit operations.

8. Commissioning

8.1 General Commissioning

9. Display and Control Elements

9.1 KFGS Series Control Screen

9.2 KFGC Series (CAN bus) Control Screen

10. KFGS Display Mode

10.1 KFGS Series Display Mode Navigation

11. KFGS Programming

11.2 Change Lubrication Interval Times

11.3 Configure System Monitoring

11.4 Change Operating Modes

11.5 Change Access Code

12. KFGS Operating Modes

12.1 Timer Operation

12.2 Counter Operation

12.4 With System Monitoring

12.5 Fill Level Monitoring

12.6 Monitoring via Piston Detector

12.7 Monitoring via Pressure Switch

14. Maintenance

Safety Precautions and General Maintenance

15. Operational and Pump Faults

15.1 KFGS Operational Malfunctions

Covers KFGS malfunctions, fault display, deletion, and types with responses.

15.2 Operational Malfunctions on KFGC (CAN bus)

Covers KFGC malfunctions, fault types, notifications, and remedy procedures.

16. Technical Data