SKF P Series User Manual

Piston pump with/without
lubricant reservoir
for use in centralized lubrication systems
Product series:
P.., PE.., PEF.., PEU.., PEW..
PF.., PFH.., PFP.., PFW.., PFPW..
PPU.., PHU.., PW..
204-.., 205-..
Owner’s Manual - Containing Installation,
Operation and Maintenance Instructions
(Original installation instructions in accordance with EC-
Machinery Directive 2006/42/EC)
Version 01
WARNING:
Read this owner's manual before installing, operating or maintaining the product. Failure to follow the
instructions and safety precautions in this owner’s manual could result in serious injury, death, or property
damage. Keep for future reference.

SKF P Series Specifications

General

Brand	SKF
Model	P Series
Category	Water Pump
Language	English

Summary

Product Compliance and Information

EC Declaration of Conformity and Incorporation

Safety Instructions

Intended Use and Prohibited Applications

Defines correct application and prohibits use with hazardous fluids or gases.

Authorized Personnel Requirements

Specifies qualifications for personnel involved in assembly, operation, and maintenance.

Electrical Shock Hazard

Covers risks from electrical connections and safe working practices.

System Pressure Hazard

Addresses hazards from system pressure and the need for depressurization.

Compressed Air Hazard

Details dangers from compressed air pressure and depressurization.

Spring-Loaded Component Hazard

Warns of crushing hazards from spring-loaded components.

Hydraulic Pressure Hazard

Details risks related to hydraulic pressure and depressurization needs.

Lubricants

Lubricant Selection Criteria

Approved Lubricants

Assembly Instructions

General Assembly and Personnel Requirements

Covers qualified personnel and general assembly safety precautions.

Setup and Mounting Guidelines

Instructions for mounting, accessibility, and environmental factors.

Compressed Air Connection

Hydraulic Connection

Lubrication Line Connection

Lubrication Line Arrangement

Operation

General Operation and Inspection

Commissioning Procedure

Venting the Lubrication System

Maintenance

Fault Analysis and Rectification