SKF P Series User Manual

1. Safety instructions Page 9
EN
1.3. Electric shock hazard
Electrical connections for the described product may
only be established by qualified and trained
personnel authorized to do so by the operator, and
in observance of the local conditions for connections
and local regulations (e.g., DIN, VDE). Serious injury
or death and property damage may result from
improperly connected products.
Danger!
Performing work on an energized pump or
product may result in serious injury or
death.
Assembly, maintenance, and repair work
may only be performed on products that
have been de-energized by qualified
technical personnel. The supply voltage
must be switched off before opening any of
the product's components.
1.4. System pressure hazard
Danger!
Centralized lubrication systems are
pressurized during operation. Centralized
lubrication systems must therefore be
depressurized before starting assembly,
maintenance or repair work, or any system
modifications or system repairs.
1.5. Compressed air hazard
Danger!
The described product is pressurized
during operation. The product must
therefore be depressurized before starting
assembly, maintenance or repair work, or
any system modifications or system
repairs.
Depending on the model design, the product may be
able to be operated with compressed air.
1.6. Spring-loaded component hazard
Danger!
In the model design for manual operation,
the described product contains an
operating lever that is under spring
preload. It is important to note that the
operating lever is returned by spring force
to its normal position after actuation. This
presents a crushing hazard for the
operator.
Depending on the model design, the product may be
able to be operated manually.
1.7. Hydraulic pressure hazard
Danger!
The described product is pressurized
during operation. The product must
therefore be depressurized before starting
assembly, maintenance or repair work, or
any system modifications or system
repairs.
Depending on the model design, the product may be
able to be operated hydraulically.
1.8. Warranty and liability
SKF Lubrication Systems Germany AG assumes no
warranty or liability for the following:
o Non-compliant usage
o Improper assembly/disassembly or improper
operation
o Use of unsuitable or contaminated lubricants
o Maintenance and repair work performed
improperly or not performed at all
o Use of non-original SKF spare parts
o Alterations or modifications performed without
written approval from SKF Lubrication Systems
Germany AG
o Non-compliance with the instructions for
transport and storage

SKF P Series Specifications

General

Brand	SKF
Model	P Series
Category	Water Pump
Language	English