SKF P Series User Manual

8. Maintenance Page 25
EN
8. Maintenance
Danger!
Performing work on an energized pump or
product may result in serious injury or
death. Assembly, maintenance, and repair
work may only be performed on products
that have been de-energized by qualified
technical personnel. The supply voltage
must be switched off before opening any of
the product's components.
Danger!
Centralized lubrication systems are
pressurized during operation. Centralized
lubrication systems must therefore be
depressurized before starting assembly,
maintenance or repair work, or any system
modifications or system repairs.
Danger!
The described product is pressurized
during operation. The product must
therefore be depressurized before starting
assembly, maintenance or repair work, or
any system modifications or system
repairs.
Products from SKF Lubrication Systems Germany
AG are low-maintenance. However, all connections
and fittings must be regularly inspected for proper
seating to ensure proper function and to prevent
hazards from arising.
If necessary, the product can be cleaned using mild
cleaning agents that are compatible with the
product's materials (non-alkaline, non-soap). For
safety reasons, the product should be disconnected
from the power supply and the hydraulic and/or
compressed air supply.
Do not allow any cleaning agent to enter the interior
of the product during cleaning.
It is not necessary to clean the interior of the
product if the product is operated normally and
intercompatible lubricants are used.
The interior of the product must be cleaned if
incorrect or contaminated lubricant is accidentally
filled into the product. If this occurs, please contact
the Service department of SKF Lubrication Systems
Germany AG for assistance.
Dismantling of the product or individual
parts thereof within the statutory warranty
period is not permitted and voids any
claims.
Only original spare parts from SKF
Lubrication Systems Germany AG may be
used. Unauthorized alterations to products
and the use of non-original spare parts
and accessories are prohibited and nullify
the statutory warranty.
SKF Lubrication Systems Germany AG shall not be
held liable for damages resulting from improperly
performed assembly, maintenance or repair work on
the product.

SKF P Series Specifications

General

Brand	SKF
Model	P Series
Category	Water Pump
Language	English