SKF P Series User Manual

2. Lubricants Page 11
EN
2.3. Approved lubricants
Warning!
Only lubricants approved for the product
may be used. Unsuitable lubricants can
lead to failure of the product and damage
to property.
Warning!
Different lubricants must not be mixed
together. Doing so can cause damage and
require extensive cleaning of the
product/centralized lubrication system. It is
recommended that an indication of the
lubricant in use be attached to the
lubricant reservoir in order to prevent
accidental mixing of lubricants.
The described product can be operated using
lubricants that meet the specifications in the
technical data.
Note that in rare cases, there may be lubricants
whose properties are within the permissible limits
values but whose other characteristics render them
unsuitable for use in centralized lubrication systems.
For example, synthetic lubricants may be
incompatible with elastomers.
2.4. Lubricants and the environment
Warning!
Lubricants can contaminate soil and bodies
of water. Lubricants must be used and
disposed of properly. Observe the local
regulations and laws regarding the
disposal of lubricants.
It is important to note that lubricants are
environmentally hazardous, flammable substances
that require special precautionary measures during
transport, storage, and processing. Consult the 
safety data sheet from the lubricant manufacturer
for information regarding transport, storage,
processing, and environmental hazards of the
lubricant that will be used. The safety data sheet for
a lubricant can be requested from the lubricant
manufacturer.
2.5. Lubricant hazards
Danger!
Centralized lubrication systems must
always be free of leaks. Leaking lubricant is
hazardous due to the risk of slipping and
injury. Beware of any lubricant leaking out
during assembly, operation, maintenance,
or repair of centralized lubrication systems.
Leaks must be sealed without delay.
Lubricant leaking from centralized lubrication
systems is a serious hazard. Leaking lubricant can
create risks that may result in physical harm to
persons or damage to other material assets.
Follow the safety instructions on the
 lubricant's safety data sheet.
Lubricants are hazardous substances. The safety
instructions on the lubricant's  safety data sheet
must be strictly followed. The safety data sheet for a
lubricant can be requested from the lubricant
manufacturer.

SKF P Series Specifications

General

Brand	SKF
Model	P Series
Category	Water Pump
Language	English