SKF TKTI 21 Quick Start Guide

2 SKF TKTI 21 & 31
2. Charging the battery
Before first use, it is recommended to fully charge the two
batteries.
The battery door is located in the bottom of the handle.
Open the battery compartment as shown below.
Battery door
Remove the battery and place it in the charger provided.
To fully charge the battery will take approximately 3 hours.
Insert the battery back into the camera taking care the
connectors are in the same position as shown below.
Battery insertion
Batteries care
• Batteries should be stored at ambient temperature.
• Lithium batteries will self-discharge during storage,
they should be fully charged before storage.
• The batteries should be fully charged at least once
every 3 months.

SKF TKTI 21 Specifications

General

Brand	SKF
Model	TKTI 21
Category	Thermal cameras
Language	English