What to do if there is no thermal image on the screen of my SKF Thermal camera?
If you're not seeing a thermal image on the SKF Thermal camera's screen, make sure that the lens cover has been removed. Also, if you are viewing a saved image, press the C button to exit and view the thermal image.
How to fix an SKF Thermal camera that does not switch on?
If your SKF Thermal camera is not switching on, first, ensure the battery is correctly installed. If it is, try charging the battery. As a last resort, if “Power off” protection is enabled, wait for 5 seconds and reboot the device.
Why does my SKF Thermal camera power off automatically?
If your SKF Thermal camera powers off automatically, the battery might be out of power, so charge it. Alternatively, the AutoOffTime option might be enabled. In this case, set AutoOffTime to a different value.
Why does the battery level on my SKF Thermal camera drain too fast?
If the battery level of your SKF Thermal camera drains too fast, it could be due to a few reasons. The ambient temperature might be too low. Ensure that the rechargeable battery is fully charged. If the battery is completely drained and cannot be recharged, you may need to replace it with a new one.
Why is the thermal image on my SKF Thermal camera white-black?
If the thermal image on your SKF Thermal camera is white-black, it's likely because the white-black palette is selected. To resolve this, simply select another palette.
General| Resolution | 160 x 120 pixels |
|---|---|
| Battery Life | 4 hours |
| Laser Pointer | Yes |
| Temperature Range | -20°C to +350°C |
| Thermal Sensitivity (NETD) | <100 mK |
| Focus | Focus free |
| Emissivity | Adjustable |
| Battery Type | Rechargeable Li-ion |
General warnings regarding laser safety, eye protection, and operational hazards.
Cautions on usage, maintenance, environmental conditions, and handling of the device.
Covers battery installation, replacement, charging, and safety guidelines.
Explains how to add and use measurement spots, areas, lines, and temperature profiles.
Details on setting emissivity for accurate temperature measurements.
Step-by-step guide for taking temperature readings and setting references.
Guides for diagnosing and resolving common problems encountered with the camera.
To Next Page
