SKF TKTI 21 - View Saved Images; Settings For Saved Images

28
SKF TKTI 21 & 31
4.4.3 View saved images
The Saved images can be accessed via File->Open.
• Press the C button to exit the opened image and return to live measurement.
• The camera will open the last image displayed or the last image saved, whichever
occurred last. Press Left and Right buttons to browse through the images.
• In Infrared image mode, the infrared images can be viewed.
In Visual image mode the visual images can be viewed.
4.4.4 Settings for saved images
The Save setting menu allows to choose whether the thermal image and the visual image
should be saved together with or without an audio comment.
Open the menu File->Save Setting.
• Link Save
With Link Save “On”, the camera will always save a thermal image and a visual
image together. With Link Save “off”, the camera will only save the thermal or visual
image the camera is viewing at the time of the save.
Note:
Always save thermal images with thermal camera active, when Link Save is On.
Note:
By default the thermal image and the visual image will be saved together.