29
SKF TKTI 21 & 31
• Voice Save
With Voice Save “On”, the camera will start the voice recording after the user saves
the image. No recording will occur with Voice Save set to “Off”.
Voice save setting is ignored with the Auto Save function.
Note:
To add a voice comment to an already existing uncommented image, enable Voice Save,
open the image to be modified and select File->Save. The camera will prompt you to
record the message and the image will receive a new number while the old image will
remain unchanged.
Figure 31 Save Setting
• Auto Save
Auto Save allows the camera to automatically save images at a user-specified time
interval. Voice annotation is inactive with Auto Save.
With Auto Save set to 0 the function is disabled.
To enable, select 10 to 3 600 seconds (1 hour), in 1-second increments.
Select File->Auto Save to access the auto save function.
• Delete
When browsing through saved images, images can be deleted by selecting
File->Delete, to delete the current opened image. If it has a voice comment,
it will also be deleted. Press the C button to cancel the deletion.
CAUTION:
Before deleting, make sure the file is not required or is already backed up.
Files cannot be recovered after deletion.
To Next Page
Loading...
Need help?
General
