21
SKF TKTI 21 & 31
4.2.3.4 Factory Default
Select Setup->Default to open the Default dialog box.
Press the Okay button to reset the settings to the factory default.
Press the C button to cancel the reset operation.
Note:
The default function will delete all parameters defined by the user.
Note:
Restoring Default settings will NOT delete the images stored on the micro SD memory
card.
4.3 Measuring
4.3.1 Laser pointer
The laser pointer is used to illuminate and identify features in the image.
• Press the trigger to switch On the laser.
• Release the trigger to switch Off the laser.
The laser is aligned to objects at a 2 meters distance.
Note:
The user can choose to assign other functions to the trigger, in that case the trigger will
not operate the laser.
4.3.2 Colour palettes
Different colour palettes are useful in viewing objects and scenes for different
requirements. As a simple rule of thumb, palettes with a lot of different colours are
more helpful when looking for hot spots or cold spots, whereas palettes with fewer and
gradually changing colours are more useful in viewing changes of temperatures in a scene
or object. It is recommended that you find the palette which suits you best.
11 palettes
are available:
1. Ironbow 2. High Contrast 2 3. Rainbow 3 4. White Hot Mono 5. Hot Metal
6. Rainbow 2 7. Black hot Mono 8. High Contrast 1 9. Rainbow 1 10. Cool Metal 11. Amber
Figure 22 11 palettes
To Next Page
Loading...
Need help?
General
