3EN
WARNING LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
Max. Output: <1mW Wavelenght: 635-660nm
Complies with 21 CFR Chapter 1, subchapter J
Safety recommendations
• Always read and follow the operating instructions for use.
• Never stare directly into the laser source. Class II laser product.
• Never aim the laser beams into anyone’s eyes.
• Never open the instrument.
• Never use the instrument under rain or very wet conditions
• Not for intrinsically safe area
• All repair work should be taken care of by an SKF repair shop.
• Here is a table of hazardous substance name and concentration
for TKTL 21:
Part
name
Hazardous Substances
Lead Mercury Cadmium Hexavalent
Chromium
Polybrominated
biphenyls
Polybrominated
diphenyl
ethers
(Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE)
Laser
module
× • • • • •
The table is prepared in accordance with the provisions of SJ/T11364.
•: Indicates that said hazardous substance contained in all of the
homogeneous materials for this part is below the limit requirement
of GB/T 26572.
× : Indicates that said hazardous substance contained in at least one of
the homogeneous materials used for this part is above the limit
requirement of GB/T 26572.
To Next Page
Loading...
Need help?
General
