92
This adjustable drive pulley allows setting maximum engine RPM in
the vehicle to maintain maximum power.
Calibration screws should be adjusted so that actual maximum en-
gine RPM in vehicle matches with the maximum horsepower RPM.
NOTE : Use precision digital tachometer for engine RPM ad-
justment.
NOTE : The adjustment has an effect on high RPM only.
To adjust, modify ramp end position by turning calibration screws.
Calibration screw has a notch on top of its head.
1. Notch
Governor cup has 6 positions numbered 2 to 6. Not that in position
1 the number is substitued by a dot (due to its location on casting).
'
A16D0FA
1
To Next Page