How to fix Ski-Doo Offroad Vehicle if it cannot reach full speed?
If your Ski-Doo Offroad Vehicle cannot reach full speed, check for a damaged or worn drive belt and replace it if necessary. Also, check the track tension and alignment and readjust to specifications.
Why Ski-Doo Offroad Vehicle engine lacks acceleration?
If your Ski-Doo Offroad Vehicle engine lacks acceleration or power, the spark plug may be fouled or defective. Also, the fuel line may be clogged with water or dirt; in this case, check the fuel line condition.
What to do if Ski-Doo Offroad Vehicle engine turns over but won't start?
If your Ski-Doo Offroad Vehicle's engine turns over but doesn't start, or starts with difficulty, there could be several reasons. It might be due to no fuel reaching the engine; in this case, check the tank level and fill up with the correct gas-oil mixture, and inspect the fuel lines for any clogs. Another possibility is a flooded engine. If this occurs, remove the wet spark plugs, turn the ignition off, and crank the engine several times. Then, install clean, dry spark plugs and attempt to start the engine using the usual procedure. Also, check for fouled or defective spark plugs. Too much oil in the fuel can also cause starting issues; if this is the case, drain the fuel tank and refill it with the correct gas/oil mixture. Finally, check the condition and connections of fuel lines, and ...
General| Brand | Ski-Doo |
|---|---|
| Model | Blizzard 5500 1981 |
| Category | Offroad Vehicle |
| Language | English |
To Next Page