Skil AG242001 User Manual

WARNING: To reduce the risk of injury, the user must read and understand the
Owner’s Manual before using this product. Save these instructions for future reference.
AVERTISSEMENT : Afin de réduire les risques de blessure, l’utilisateur doit lire et
comprendre le guide d’utilisation avant d’utiliser cet article. Conservez le présent guide
afin de pouvoir le consulter ultérieurement.
ADVERTENCIA : Para reducir el riesgo de lesiones, el usuario debe leer y comprender
el Manual del operador antes de utilizar este producto. Guarde estas instrucciones para
consultarlas en caso sea necesario.
Owner’s Manual
Guide d’utilisation
Manual del propietario
For Customer Service
Pour le service à la clientèle
Servicio al cliente
1-877-SKIL-999
OR
www.skil.com
8A Angle Grinder
Meuleuse Aangulaire de 8 A
Amoladora de Ángulo de 8 A
Model/ Modelo/ Modèle: AG242001

Skil AG242001 Specifications

General

Power Source	Corded Electric
Voltage	120V
No Load Speed	11000 RPM
Weight	4.4 lbs
Wheel Diameter	4-1/2 in
Arbor Size	5/8 in
No-load speed	11000 rpm
Disc diameter	100 mm

Summary

General Power Tool Safety Warnings

Work Area Safety

Keep work area clean, well lit, and avoid explosive atmospheres.

Electrical Safety

Proper plug use, avoid contact with grounded surfaces, protect from water.

Personal Safety

Stay alert, use PPE, prevent unintentional starting, remove keys.

Angle Grinder Safety Warnings

General Grinding Safety

Read all warnings, follow instructions for safe grinding operations.

Grinding Wheel Selection and Guarding

Use correct wheels (Type 27) and guards; mount wheels properly.

Accessory Compatibility and Speed

Use compatible accessories and ensure accessory speed matches tool specs.

Wheel Usage and Flanges

Accessory Size and Mounting

Match accessory diameter, thickness, and mounting to tool for safety.

Accessory Integrity and PPE

Inspect accessories, wear PPE for protection from debris and noise.

Safe Handling and Environment

Handle tool safely, keep cord clear, clean vents, avoid flammables and coolants.

Kickback Safety Precautions

Understanding Kickback

Understand kickback as a sudden reaction to snagged accessories.

Additional Safety and Handling

Specific Accessory and PPE Use

Symbols and Hazard Identification

Signal Word Definitions

Angle Grinder Overview

Component Identification

Technical Specifications

Tool Specifications

Operating Instructions

Wheel Guard Installation

Grinding Wheel Assembly and Removal

Side Handle and Paddle Switch

Grinding Operations

Grinding Wheel Selection and Use

Grinding Techniques and New Wheels

Maintenance and Care

Service, Lubrication, and Brushes

Troubleshooting Common Issues

Tool Start-up Problems

Tool Speed Issues