To Next PageTo Next Page
Need help?Do you have a question about the Skil MAG77LT and is the answer not in the manual?
General| No Load Speed | 5, 300 RPM |
|---|---|
| Motor Type | Brushed |
| Electric Brake | Yes |
| Laser Guide | No |
| Dust Port | Yes |
| Motor | 15 Amp |
| Amperage | 15 A |
| Blade Diameter | 7-1/4 in |
| Arbor Size | 5/8 in |
| Cord Length | 6 feet |
Guidelines for maintaining a clean, well-lit workspace to prevent accidents during tool operation.
Precautions for safe electrical connections, grounding, and avoiding wet conditions to prevent shock.
Essential personal safety measures including alertness, protective equipment, and proper handling.
Detailed instructions and warnings for safe and effective cutting operations with a circular saw.
Guidance on professional servicing and using identical replacement parts to maintain tool safety.
Explains kickback causes and provides precautions to prevent this dangerous reaction.
Details the operation and importance of the lower guard for safety, including checks and proper usage.
Warnings regarding GFCI, AC/DC power compatibility, and maintaining dry handles for safe operation.
Precautions for tool maintenance, cleaning, and avoiding damage from specific cleaning agents.
Information on health risks from dust exposure and recommended protective measures.
Explanation of various symbols used on the tool for better and safer operation.
Identifies and explains various agency and certification marks indicating product safety and compliance.
Identifies and illustrates the main parts and features of the circular saw.
Details the maximum cutting capacities and specifications for the saw, including depth and angles.
Step-by-step instructions for safely installing the saw blade, including the Vari-Torque Clutch.
Explanation of the Vari-Torque Clutch's function in reducing kickback and proper adjustment.
How to set the cutting depth of the blade for optimal results and minimal splintering.
Procedure to verify and adjust the saw for a precise 90-degree cutting angle.
Instructions for adjusting the saw's bevel angle up to 45 degrees for angled cuts.
How to use the integrated line guide for accurate cutting, including sample cuts for verification.
Guidance on adjusting the depth stop for stable cutting, especially with tool wear.
Explains the various functions of the provided wrench and proper insertion for use.
How to safely operate the trigger switch for starting, stopping, and general use.
Basic principles for holding and operating the saw for general cutting tasks.
Step-by-step guide on how to perform plunge cuts safely and effectively.
Warning against using abrasive wheels for cutting masonry or metal with circular saws.
Techniques for safely cutting large sheets and boards, emphasizing support and depth setting.
How to perform rip cuts using the rip fence or a board guide for accurate lengthwise cuts.
Advice on professional servicing and avoiding unauthorized repairs for safety.
Instructions for checking and maintaining the oil level in the tool for proper operation.
Guidance on inspecting and replacing carbon brushes for motor maintenance.
Information on identifying and replacing noisy bearings to prevent motor failure.
Methods for cleaning the tool, including using compressed air and avoiding specific solvents.
Tips on blade maintenance, cleaning, and when to replace dull blades.
Specific instructions for using the Twist-To-Lock connector on certain models.
Guidelines for selecting and using appropriate extension cords for the tool.
List of standard and optional accessories available for the tool.
Common causes and remedies for the saw failing to start, including power and switch issues.
Troubleshooting steps for when the saw blade does not reach its operational speed, often related to power or cord issues.
Potential causes and solutions for excessive vibration during tool operation, such as blade balance or support.
Reasons and fixes for inaccurate square cuts, involving foot adjustment and guides.
Solutions for common ripping problems like binding, burning, and motor stalling, related to blade or support.
Diagnosis and remedy for blade slipping, often linked to the Vari-Torque clutch adjustment.
Details the warranty period, exclusions, and limitations for SKIL power tools.
Provides contact details for warranty claims, service centers, and customer support.
