-3-
0:*655,*;;/,73<.-964;/,76>,9:6<9*,
(5+69;/,)(;;,9@7(*2-964;/,76>,9;663
),-69,4(205.(5@(+1<:;4,5;:*/(5.05.
(**,::690,:69:;6905.76>,9 ;663: Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
;69, 0+3, 76>,9 ;663:6<; 6-;/,9,(*/ 6-
*/03+9,5(5++656;(336>7,9:65:<5-(4030(9
>0;/;/,76>,9;66369;/,:,05:;9<*;065:;6
67,9(;, ;/, 76>,9 ;663 Power tools are
dangerous in the hands of untrained users.
(05;(0576>,9;663:/,*2-6940:(30.54,5;
69 )05+05. 6- 46=05. 7(9;: )9,(2(., 6-
7(9;: (5+ (5@ 6;/,9 *65+0;065 ;/(; 4(@
(--,*;;/,76>,9;663E:67,9(;065-+(4(.,+
/(=, ;/, 76>,9 ;663 9,7(09,+ ),-69, <:,
Many accidents are caused by poorly
maintained power tools.
,,7*<;;05.;663::/(97(5+*3,(5Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
":, ;/, 76>,9 ;663 (**,::690,: (5+;663
)0;:,;*05(**69+(5*,>0;/;/,:,05:;9<*;065:
;(205.05;6(**6<5;;/,>69205.*65+0;065:
(5+ ;/, >692 ;6 ), 7,9-694,+Use of the
power tool for operations different from those
intended could result in a hazardous situation.
,9=0*,
(=,@6<976>,9;663:,9=0*,+)@(8<(30-0,+
9,7(09 7,9:65 <:05. 653@ 0+,5;0*(3
9,73(*,4,5;7(9;: This will ensure that the
safety of the power tool is maintained.
(-,;@<3,:-6909*<3(9 (>:
,(+(33:(-,;@>(9505.:(5+(3305:;9<*;065:
!
WARNING
<;;05.796*,+<9,:
,,7 /(5+: (>(@ -964
*<;;05. (9,( (5+ ;/, )3(+,
,,7@6<9:,*65+/(5+65(<?030(9@/(5+3,
6946;69/6<:05. If both hands are holding
the saw, they cannot be cut by the blade.
656; 9,(*/ <5+,95,(;/ ;/, >69270,*,
The guard cannot protect you from the blade
below the workpiece.
+1<:;;/,*<;;05.+,7;/;6;/,;/0*25,::6-
;/,>69270,*,Less than a full tooth of the
blade teeth should be visible below the
workpiece.
,=,9/63+ 70,*, ),05. *<; 05 @6<9 /(5+:
69(*96::@6<93,. ,*<9,;/,>69270,*,;6
(:;()3, 73(;-694 It is important to support
the work properly to minimize body exposure,
blade binding, or loss of control.
63+;/,76>,9;663)@05:<3(;,+.907705.
:<9-(*,: 653@ >/,5 7,9-69405. (5
67,9(;065 >/,9, ;/, *<;;05. ;663 4(@
*65;(*; /0++,5 >0905. 69 0;:6>5*69+
Contact with a "live" wire will also make
exposed metal parts of the tool “live” and could
give the operator an electric shock.
$/,5 907705. (3>(@: <:, ( 907 -,5*, 69
:;9(0./; ,+., .<0+, This improves the
accuracy of cut and reduces the chance of
blade binding.
3>(@: <:, )3(+,: >0;/ *699,*; :0A,(5+
:/(7,+0(465+ =,9:<:96<5+ 6- (9)69
/63,:Blades that do not match the mounting
hardware of the saw will run eccentrically,
causing loss of control.
,=,9 <:, +(4(.,+ 69 05*699,*; )3(+,
>(:/,9:69)63; The blade washers and bolt
were specially designed for your saw, for
optimum performance and safety of operation.
5:7,*; ;/, *65+0;065 (5+ 8<(30;@ 6-;/,
>66+ (5+ 9,46=, (335(03:-964 3<4),9
),-69,*<;;05.Wet lumber, green lumber or
pressure treated lumber require special
attention during cutting operation to prevent
kickback.
63+ ;/, :(> -0943@ ;6 79,=,5; 36:: 6-
*65;963 Figures in this manual illustrate
typical hand support of the saw.
,7,5+05. <765<:,;/, :>0;*/ 4(@ 56;
3(:;;/,30-,6-;/,:(>-;/,:>0;*/:/6<3+
-(0305;/,CD76:0;065;/,:(>4(@56;
:;(9; - 0; :/6<3+ -(03 >/03, ;/, :(> 0:
9<5505.;/,:(>4(@ 56;:/<;6-- If either
occurs, unplug the saw immediately and do
not use until repaired.
DANGER
!
To Next Page
