Skipala DIGR-1202/E User Manual

3/22
1. Technical data
Supply voltage U
nap
230V 50Hz
Maximum output current 6A
Output voltage 2x 20-99% U
nap
2x digital input 24V DC PNP
2x digital output 24V DC max. 120 mA
1x analogue input 0-10V DC
or digital input 24V DC PNP
Auxiliary output voltage 24V DC max. 180 mA
10V DC max. 10 mA
Coverage IP54
Working temperature 10-55ºC
Loss output 10 W
Interference suppression EN 55011/A
Short-circuit resistance 1.5 kA
Weight 1.2 kg
2. Description
The DIGR-1202/E Controller is a triac controller for
regulating vibration feeder driven by an electromagnetic
coil. The basic regulation value is the output voltage.
The controller can be used for quickly setting the
oscillations frequency 100 Hz, 50 Hz, 33 Hz. The
controller is controlled by 28 parameters set by the
user on the control panel. The controller can be
controlled from the control panel by outside analogue
and digital signals.
The controller has IP54 coverage and can be mounted
outside the switchboard. It includes a safe separated
24V / 4VA DC supply for the sensors and valves and
a 10V DC supply for analogue input.
Their small size and easy use allow the controllers to
work independently, as well as with a master system in
most feeder applications.

Skipala DIGR-1202/E Specifications

General

Brand	Skipala
Model	DIGR-1202/E
Category	Controller
Language	English