18/23
Monitor IN1 OFF – The output monitors the off status
of digital input IN1. The setting and functions
are the same as when monitoring input IN1 ON.
Monitor IN2 ON – The output monitors the on status of
digital input IN2. The setting and functions are
the same as when monitoring input IN1 ON.
Monitor IN2 OFF – The output monitors the off status
of digital input IN2. The setting and functions
are the same as when monitoring input IN1 ON.
8.13. A25 Timer T11
Universal timer where the use is determined by
setting parameter A24 (Output OUT1).
8.14. A26 Timer T12
Universal timer where the use is determined by
setting parameter A24 (output OUT1).
8.15. A27 Timer T13
Universal timer where the use is determined by
setting parameter A24 (Output OUT1).
8.16. A28 Output OUT2
Determining the use of digital output OUT2. The setup
is similar to the parameter A24 (output OUT1). The
difference is in the numbers (marks) of the timers,
that are utilized by the output. Instead of timers T11,
T12, T13 (parameters A25, A26, A27) uses output OUT2
timers T21, T22, T23 (parameters A29, A30, A31).
8.17. A29 Timer T21
Universal timer where the use is determined by
setting parameter A28 (Output OUT2).
8.18. A30 Timer T22
Universal timer where the use is determined by
setting parameter A28 (Output OUT2).
8.19. A31 Timer T23
Universal timer where the use is determined by
setting parameter A28 (Output OUT2).
8.20. A32, A33
Reserved for future use.
To Next Page
Loading...
Need help?
General
