22/23
9. Maintenance
The controller does not require any special
maintenance. Carry out Pergorm only regular inspection
in accordance with ČSN EN50110-1 ed.3 and Regulation
No. 50/78 Sb. In the case of failure do not repair -
send the controller to the manufacturer for repair. When
changing the fuse, observe the prescribed T8A value.
Tip for you: In the case of complications with the
operation of the controller, reset the factory setting
of the parameters (Chapter 8.29.).
10. Disposal
At the end of its service life the controller must be
handed over for professional disposal to a specialized
firm or the manufacturer.
11. Guarantee
The guarantee for the product is 12 months from the
day of sale.
Serial number:
Seller: Date of sale:
To Next Page
Loading...
Need help?
General
