4
Section 1General Information
1-1. How to use Power Cord?
1-1-1. Be sure not put more plug in the socket. Please use the dedicated outlet.
-Overheated wire, which will cause fire or start malfunction
1-1-2. Wet hands off the power.
- Life is in danger
1-2. How to disconnect the power cord?
☞To prohibit leakage or electric shock, please use the prescript method to connect ground.
1-2-1. if there are grounds connectors for 220v units, units don’t need ground while outlet is for AC 220v. (Please
make sure that there are grounds in buildings, then units can use AC 220v outlets with grounds connectors.)
1-2-2. the power is 220v without ground connector, use dedicated outlet to ground.
A. Please connect earth wire to copper, which will be covered under moisture ground. (The depth is more than
17cm)
- Copper item: thickness: >0.7mm square: >900cm
2
B. Please connect the dedicated ground outlet.
1-2-3. Prohibition ground places
Gas pipe Water-pipe Telephone lines
To Next Page
Loading...