›
Return the expanding rivet, screw in.
›
Firmly tighten the two attachment bolts with the screwdriver.
Ð
Changing the bulb for the licence plate light
Fig. 125 Changing the bulb for the licence plate light
First read and observe the introductory information and safety warn-
ings on page 141.
›
Insert a suitable thin object, e.g. a screwdriver into the recess in the region of
the arrow and carefully prise the number plate light out of the bumper » Fig. 125
- .
›
Pull the number plate light out of the bumper a little.
›
Turn the bulb holder anti-clockwise and remove in the direction of the ar-
row » Fig. 125 - .
›
Remove the faulty bulb from the socket.
›
Insert a new bulb into the socket.
›
Insert the bulb holder into the number plate light and turn clockwise as far as
the stop.
›
Insert the number plate light into the opening of the bumper at the left edge.
Lightly press it until the spring latches.
Ð
ä
Tail lamp assembly
Fig. 126 Removing the tail lamp assembly
Fig. 127 Tail light assembly: Replacing bulbs
First read and observe the introductory information and safety warn-
ings on page 141.
Fold the seat rest of the rear set bench forward to make it easier to reach the
cover of the rear light more easily » page 40, Folding the rear seat backrest for-
wards.
Removing and installing the tail light
›
Open the luggage compartment door and unscrew the luggage compartment
cover » page 43.
›
Prise the cover
1
» Fig. 126, insert the screwdriver underneath the lower edge
of the locking mechanism
3
» page 127, Vehicle tool kit and pull the locking
mechanism at the connector
2
in the direction of arrow.
›
Press the locking mechanism
4
and remove the connector
2
.
£
ä
143
Fuses and light bulbs
To Next Page
Loading...
