Description of the operation
Button/adjust-
ment
wheel » Fig. 7
Operation Action
A
Select data Briefly push up or down
Set data values Briefly push up or down
Open main menu in the MAXI DOT display Press and hold button
B
Show data Press briefly
Confirm data Press briefly
C
Open main menu in the MAXI DOT display Press and hold button
to go back one level in the menu of the MAXI DOT display Press briefly
D
Select data Turn upwards or downwards
Set data values Turn upwards or downwards
Show data Press briefly
Confirm data Press briefly
Ice warning
First read and observe the introductory information and safety warn-
ings on page 22.
Prompt in the MAXI DOT display
If the outside temperature while driving drops to below +4°C, the following icon
appears on the display in front of the temperature display . An audible signal is
emitted.
If the outside temperature is already below +4°C when turning the ignition on,
the icon appears immediately. An audible signal is emitted.
Prompt in the segment display
1)
If the outside temperature while driving drops to below +4°C, the temperature
display » page 26, Outside temperature will show up with the following icon in
front
. An audible signal is emitted.
If the outside temperature is already below +4°C when turning the ignition on,
the temperature display and the
icon appear immediately. An audible signal is
emitted.
After pressing button
A
» Fig. 7 on page 22, the most recently displayed data is
shown.
WARNING
Even at outside temperatures of around +4 °C, black ice may still be present
on the road surface! You should therefore not rely solely on the outside tem-
perature display for an indication of whether there is black ice on the road.
1)
Applies to vehicles with the multifunction display (MFA).
23
Information system
To Next Page
Loading...
